Supplied Accessories
Check the accessories before installations.
•
Operating Instruction book
•
Batteries for the Remote
Control Transmitter
(2 × R6 (UM3) size)
Installing the ferrite core (Small size)
1
2
Pull back the tabs
(in two places)
Fitting remote control batteries
1
Slide off the battery cover
Do not use rechargeable (Ni-Cd) batteries.
They are different in shape and performance and may fail to ensure correct operation.
Battery cautions
The incorrect use of batteries can cause electrolyte leakage which will corrode the Remote Control or cause the
batteries to burst.
Observe the following precaution:
1. Batteries shall always be replaced as a pair. Always use new batteries when replacing the old set.
2. Do not combine a used battery with a new one.
3. Do not mix battery types (example:"Zinc Carbon" with "Alkaline").
4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.
5. Battery replacement is necessary when remote control acts sporadically or stops operating the TV set.
•
Remote Control Transmitter
(EUR511281)
•
Ferrite core
(small size) × 5
3
Open
Press the cable
through and close
Two "R6 (UM3)" size
2
Insert batteries - note correct
polarity (+ and -)
1
2
3
4
5
6
7
8
9
0
Installing the ferrite core (Large size)
1
2
Pull back the tabs
(in two places)
•
AC cord
•
Ferrite core
(large size) × 3
3
Open
Press the cable
through and close
3
Replace the cover
7