Olivetti Fax_Lab 710 Instructions Manual page 30

10. Press the key:
The fax machine prompts you to enter another number:
If you want to send the document to more than one
correspondent, repeat the previous two steps once for
each correspondent.
If you want to send the document to one correspondent
only, move straight on to the next step without typing
any numbers.
11. Press the key:
The display shows:
12. To choose the other option, "PRINT SETTINGS - YES",
press the keys:
13. To confirm your choice, press the key:
In either case, the display shows:
14. To choose the other option, "CONFIRM SETTINGS -
NO", press the keys:
15. To confirm your choice, press the key:
If you chose "CONFIRM SETTINGS - YES", the fax
ends the procedure and the display shows the mes-
sages "AUTOMATIC
MATIC" on the base model) and "TX FROM
MEMORY" on the second line.
If you chose "CONFIRM SETTINGS - NO", the fax
allows you to modify the previous settings, for example:
the correspondent's number or the time at which you
want to send the document.
n o t e
If there is a power failure, the transmission from the memory
will be cancelled.
2 8
00" on the first line ("AUTO-
T / /
O CHANGE REPEAT DELETE A TRANSMISSION FROM THE
MEMORY THAT IS ALREADY SET
1. Press the key:
The display shows:
2. Press the keys
until the display shows:
3. Press the key:
The display shows:
4. Press the keys
until the display shows:
You can choose any of the following options:
TX FROM MEMORY - EDIT - To change the corre-
spondent's number or the time at which you want to
send the document.
TX FROM MEMORY - PRINT - To print the memory
transmission parameters only. When it has finished print-
ing, the fax machine returns automatically to its initial
stand-by mode.
TX FROM MEMORY - DELETE - To clear the setting.
The fax machine returns to its initial stand-by mode.
5. To view the other available options, press the keys:
6. To confirm your choice, press the key:
If you chose "TX FROM MEMORY - EDIT", the display
shows:
From this point on, follow the procedure described in
"To send a document from the memory" from step 6.