Brother P-touch BB4 Service Manual page 39

2) Press the Enter key.
LCD check screen 1 will appear as shown below.
3) Press the Enter key.
LCD check screen 2 will appear as shown below.
4) Press the Enter key.
LCD check screen 3 will appear as shown below.
DIAL submode (Dial position 2 and Enter key*)
(*In any other submode, setting the select dial to Dial position 2 and pressing the Enter key
will jump to DIAL submode.)
1) When LCD check screen 3 is displayed, press the Enter key.
The machine shows the following and enters DIAL submode.
2) Make sure that the select dial is placed in Dial position 0 (Blank). If it is in any
other position, turn the select dial to Dial position 0.
3) Press the Enter key.
"0" will display as shown below.
(All guidance indicators & cursors: ON)
(All guidance indicators & cursors: ON)
II - 26