Reassembly Of The Cassette Cover Components - Brother PT-9200DX Service Manual

[9] Reassembly of the Cassette Cover Components

(1) Set the cover lock spring on the projection on the cover lock actuator, and
insert it until it locks into the guide of the cassette cover. After inserting it,
check that the cover lock actuator operates smoothly by pressing its end.
Cover lock actuator
Fig. 2.2-65 Reassembly of the Cover Lock Actuator
(2) Press-fit the cassette spring on the projection on the back of the cassette
presser while slightly rotating the cassette spring.
(3) Set the cassette presser. At this time, check that the cassette spring is set
on the projection on the cassette cover by viewing it from the side.
After setting it, check that the three hooks are securely locked and that the
cassette presser operates smoothly.
Cassette spring
Cassette presser
Fig. 2.2-66 Reassembly of the Cassette Presser
Cover lock spring
Cassette cover
Cassette spring
II-47
Cassette presser
Cassette cover