Brother FAX255 Service Manual page 98

Selector
No.
Switching of DPS, following the
1
CML ON/OFF
Time length from transmission of
2
the last dial digit to CML ON
Time length from CML ON to CNG
3
transmission
Time length from CML ON to CED
4 transmission (except for facsimile-
to-telephone switching)
5
No. of training retries
6
7
Not used.
8
Selector 1: Switching of DPS, following the CML ON/OFF
l
Setting this selector to "1" automatically switches DPS following the CML ON/OFF operation.
Selector 2: Time length from transmission of the last dial digit to CML ON
l
This selector sets the time length from when the equipment transmits the last dial digit until the
CML relay comes on.
Selector 3: Time length from CML ON to CNG transmission
l
This selector sets the time length until the equipment transmits a CNG after it turns on the CML
relay.
Selector 4: Time length from CML ON to CED transmission
l
This selector sets the time length until the equipment transmits a CED after it turns on the CML
relay. This setting does not apply to switching between facsimile and telephone.
Selectors 5 and 6: No. of training retries
l
These selectors set the number of training retries to be repeated before automatic fallback.
WSW10
(Protocol definition 2)
Function
V - 23
Setting and Specifications
0: No
0: 100 ms
0: 2 sec.
0: 0.5 sec.
No. 5 6
0 0 : 1 time
0 1 : 2 times
1 0 : 3 times
1 1 : 4 times
1: Yes
1: 50 ms
1: 4 sec.
1: 2 sec.