Mazda CX-5 Owner's Manual page 362

Hide thumbs Also See for CX-5:
Table of Contents

Advertisement

CX-5_8CA5-EA-11L_Edition3 Page362
Friday, June 22 2012 3:47 PM
Maintenance and Care
Owner Maintenance
4. Turn the socket and bulb assembly to
remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight back out of the
socket.
5. Install the new bulb in the reverse order
of the removal procedure.
Headlights (With halogen headlights)
Low-beam bulbs, High-beam bulbs/
Daytime running lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Lift the hood.
3. (Right side)
Remove the windshield washer fluid
reservoir from the guide.
Windshield washer
Guide
fluid reservoir
6-42
Form No.8CA5-EA-11L
Black plate (362,1)
4. Disconnect the connector from the unit
by pressing the tab on the connector
with your finger and pulling the
connector downward.
Low-beam bulbs
High-beam bulbs/Daytime running
lights
5. Turn the socket and bulb assembly to
remove it. Carefully remove the bulb
from its socket in the reflector by
gently pulling it straight backward out
of the socket.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents