Mazda CX-5 Owner's Manual page 136

CX-5_8CA5-EA-11L_Edition3 Page136
Friday, June 22 2012 3:45 PM
When Driving
Instrument Cluster and Display
Canceling the illumination dimmer
When the headlight switch is in the
or position, the illumination of the
instrument cluster dims.
When driving on snowy or foggy roads,
or in other situations when the instrument
cluster's visibility is reduced due to glare
from surrounding brightness, cancel the
illumination dimmer and increase the
illumination intensity.
To cancel the illumination dimmer, rotate
the knob clockwise fully. You will hear a
beep sound and the illumination dimmer
will be canceled.
NOTE
This symbol ( ) indicates the knob to
l
adjust the brightness of the dashboard
illumination.
If the dashboard illumination knob is kept
l
at the illumination dimmer cancel position,
the instrument cluster will not dim when the
headlight switch is turned to the
position again. Rotate the dashboard
illumination knob counterclockwise to
activate the illumination dimmer.
4-12
Form No.8CA5-EA-11L
qOutside Temperature Display
When the ignition is switched ON, the
outside temperature is displayed.
NOTE
Under the following conditions, the outside
temperature display may differ from the actual
outside temperature depending on the
surroundings and vehicle conditions:
Significantly cold or hot temperatures.
l
Sudden changes in outside temperature.
l
The vehicle is parked.
l
The vehicle is driven at low speeds.
l
or
The outside temperature unit can be
switched between Celsius and Fahrenheit
using the following procedure.
1. Press the INFO button with the ignition
switched off and continue pressing the
INFO button for 5 seconds or longer
while switching the ignition ON. The
outside temperature display flashes.
2. Press the up
INFO switch to change the outside
temperature unit.
3. Press and hold the INFO button for 3
seconds or longer while the outside
temperature display is flashing. The
outside temperature display
illuminates.
Black plate (136,1)
or down part of the