Mazda 2 Owner's Manual page 175

Mazda2_8CL7-EA-12H_Edition1 Page175
Monday, June 18 2012 1:49 PM
WARNING
Do not use the
rainy weather:
Using the
rainy weather is dangerous as it will
cause the windows to fog up. Your
vision will be hampered, which could
lead to a serious accident.
qHeating
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
hot position.
4. Set the fan control dial to the desired
speed.
5. If dehumidified heating is desired, turn
on the air conditioner.
NOTE
If the windshield fogs up easily, set the
l
mode selector dial to the
If cooler air is desired at face level, set the
l
mode selector dial at the
adjust the temperature control dial to
maintain maximum comfort.
The air to the floor is warmer than air to
l
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
qCooling (With Air Conditioner)
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
cold position.
Form No.8CL7-EA-12H
position in cold or
position in cold or
position.
position and
í
Black plate (175,1)
Climate Control System
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner by pressing
the A/C switch.
5. Adjust the fan control dial and
temperature control dial to maintain
maximum comfort.
CAUTION
If the air conditioner is used while
driving up long hills or in heavy
traffic, monitor the engine coolant
temperature warning light to see if it
is illuminated or flashing (page 5-41).
The air conditioner may cause engine
overheating. If the warning light is
illuminated or flashing, turn the air
conditioning off (page 7-15).
NOTE
When maximum cooling is desired, set the
l
temperature control dial to the extreme cold
position and set the air intake selector to
the position, then set the fan control
dial to position 4.
If warmer air is desired at floor level, set
l
the mode selector dial at the
and adjust the temperature control dial to
maintain maximum comfort.
The air to the floor is warmer than air to
l
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
qVentilation
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
desired position.
í
Some models.
Interior Comfort
position
6-7