Turn And Lane-Change Signals; Fog Lights Í - Mazda 2 Owner's Manual

Mazda2_8CL7-EA-12H_Edition1 Page161
Monday, June 18 2012 1:49 PM
Turn and Lane-Change
Signals
Turn Signals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change
indicator flashes and hold it there. It
will return to the off position when
released.
NOTE
If an indicator light stays on without flashing
or if it flashes abnormally, one of the turn
signal bulbs may be burned out.
Form No.8CL7-EA-12H
Use this switch to turn on the fog lights.
The fog lights will improve visibility at
night and during foggy conditions.
To turn the fog lights on, rotate the fog
light switch to the
The headlight switch must be in the
position before turning on the fog lights.
Right turn
Right lane change
OFF
Left lane change
To turn them off, rotate the fog light
switch to the OFF position or turn the
Left turn
headlight switch to the
position.
NOTE
l
l
until the
Black plate (161,1)
Switches and Controls
Fog Lights
position.
Fog light switch
The fog lights will turn off when the
headlights are set at high beam.
(With auto-light control)
If the fog light switch is in the ON position
and the headlight switch is in the AUTO
position, the fog lights will be turned on
when the headlights, the exterior lights and
dashboard illumination are automatically
turned on.
í
Some models.
Driving Your Mazda
í
or OFF
5-53