Front Panel Connectors; Rear Panel Connectors - M-Audio Black Box User Manual

However, we didn't stop there. We also added a number of new bonus features:
Amp Mid control
<
Reverb
<
Compression
<
Link Drumbeat: Now selecting a preset will automatically call up its assigned drumbeat, which you can change.
<
Tempo Source: Now you can select one of three sources for the playing tempo: the preset's assigned tempo, the drumbeat's
<
assigned tempo or the global tempo.
These new bonus features go beyond the 16 parameter menus in the LCD display, so we created a new Shift mode to access their
settings. To learn about Shift mode, see the section entitled "Additional Shift Parameters."

Front Panel Connectors

Plug your headphones into the jack with the headphone icon (11).
<
Plug your guitar into the Guitar Input jack (12).
<

Rear Panel Connectors

Plug a dynamic microphone into the Mic input (1).
<
Use the Balanced Outputs to connect to powered speakers or an analog mixer (2).
<
Use a 75-ohm S/PDIF cable to record from the S/PDIF digital output (44.1kHz only) (3).
<
Mic stand mount (optional hardware you may attach to bottom of the device with four mounting screws) (4).
<
Connect an expression pedal, like the M-Audio EX-P, to the Expression pedal jack to control continuous functions like wah
<
effects (5).
Connect momentary pedals, like the M-Audio SP-1, to the P1 (6) and P2 (7) jacks to control on/off functions like Start/Stop,
<
Inc/Dec, etc. (6).
Connect the USB connection on the Black Box to your computer with the included USB cable (8).
<
User Guide 5
♦