Change Of The Setup Menu Item Order - Fostex PD-6 Supplemental Operation Manual

Model PD-6 operation manual (Supplement for V2.20)

Change of the Setup menu item order

The menu items in the Setup menu screen are now arranged in the order of frequency of
use, so that you can access to the desired item more easily.
The following show the initial Setup menu screens and the menu item orders before and
after V2.20.
Note that the description of the Setup menu operation in the PD-6 operation manual is
based on the earlier version, therefore, there are some differences between the actual
operations with V2.20 and the manual description.
<Primary Setup screen before V2.20>
<Menu item order before V2.20>
<Primary Setup screen after V2.20>
<Menu item order after V*2.20>
6
Model PD-6 operation manual (Supplement for V2.20)
"Set Gen Ubit" menu item newly added to the TC SETUP menu
The "Set Gen Ubit" menu item is newly added to the TC SETUP menu.
This menu item allows you to set the TC user bit mode and TC user bit value.
While the [SHIFT] indicator is lit, press the [CONTRAST/TC SETUP] key to enter the TC
SETUP menu. Then use the [SEL] dial to highlight "Set Gen Ubit" and press the [ENTER] key.
The display now shows the "Set Gen Ubit" screen on which you can set the user bit mode
and the user bit value.
Shows the current user bit. You can
set the desired user bit.
The rightmost two figures of the
user bit are always used regard-
less of the "Ubit MD" setting.
Selecting the user bit mode
By pressing the [ENTER] key while "Ubit MD: <User>" is highlighted, the current user bit mode starts
flashing and you can now select the mode (by default, "<User>" flashes).
Use the [SEL] dial to select the user bit mode and press the [ENTER] key to confirm your selection.
You can select from among the following.
<User> The default is "00 00 00 00".
MMDDYYuu
BG_76: MM (month) / BG_54: DD (day) / BG_32: YY (year) /BG_10: uu (for USA)
DDMMYYuu BG_76: DD (day) / BG_54: MM (month) / BG_32: YY (year) /BG_10: uu (for EUR)
When selecting "MMDDYYuu" or "DDMMYYuu", you can set the desired user bit to "uu" of
"BG_10: uu". The other fields are automatically set to the date of the realtime clock.
Editing the user bit
By using the [SEL] dial to highlight "User: 00 00 00 00" and pressing the [ENTER] key, the rightmost
field of the current user bit (by default, "0") starts flashing and you can now make editing.
You can enter the desired value to the flashing field using the numeric keys or the [SEL] dial (or a
USB keyboard). You can move the flashing field using the [SKIP/CURSOR] keys.
Sets the user bit mode. See the
table below for details about the
available options. The default is
"<User>", which is set to "00 00 00
00" by default.
Shows the user bit being output ac-
cording to the current user bit
mode.
Flashing
Flashing
11