PowerShot S60
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied interface cable to the computer's USB port and the camera's
DIGITAL terminal as shown below.
The camera and computer will automatically set themselves to the correct mode for
communicating when they are connected.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 2.1
See ArcSoft Camera Suite 2.1 CD-ROM (p. 75) for information about the features and
installation procedures for the programs on the disk.
Non-Supported Programs and Features
All programs and features are supported.
USB Port
1. Slip a fingernail under the terminal
Interface Cable
2. Insert the interface cable connector
To the DIGITAL
Terminal
cover and lift to open.
all the way into the digital terminal
until it clicks.
95