Install Menu - Bosch DINION XF LTC 0495 Installation Manual

Dinion | Installation Manual
XF
Installer Settings

Install menu

Function Selection
LENS Select submenu
WIZARD
I/O Select submenu
SYNC Select submenu
CAMERA ID Select submenu
DEFAULTS Select submenu
EXIT
Install lens wizard submenu
Function Selection
LENS TYPE AUTO, MANUAL,
DCIRIS, VIDEO
DETECTED
SET BACK
FOCUS
NOW
SET LVL
EXIT
Adjustment procedure DC-iris Lens:
1. Unlock the back focus locking button.
2. Access the Lens Wizard menu.
3. SET BACK FOCUS NOW is highlighted in the menu.
4. Turn the back focus adjustment as required.
5. Lock the back focus locking button.
6. Exit the menu.
Bosch Security Systems | 2004-01 | V1.0
Description
Select to optimize camera lens combination
Select to access the I/O functions
Select to access the synchronization functions
Select to access ID menu
Return all settings for all modes to factory defaults
Exit the menu
Description
In AUTO mode the camera auto detects the type
of lens used or force the camera into a mode.
If the LENS TYPE detection is in AUTO, the
detected lens type will be shown.
Select to force lens to its maximum opening. After
focusing the lens the object of interest remains in
focus in bright and low light conditions.
(Video iris lenses only). The level detector
indicator must be set to the center by adjusting
the level potentiometer on the lens, to obtain the
best picture performance.
Return to the INSTALL menu
EN | 22