Assembly Instructions - Blue Rhino 62100 Owner's Manual

Assembly Instructions

1
DO NOT RETURN PRODUCT TO STORE.
For assistance call 1.800.762.1142 toll free. Please have your
owner's manual and serial number available for reference.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble
your product on a hard level surface that does not have cracks
or openings.
• Clear an area large enough to layout all components and
hardware.
• When applicable, tighten all hardware connections by hand
first. Once the step is completed go back and fully tighten all
hardware.
• Follow all steps in order to properly assemble your product.
To complete assembly you will need:
• (1) Leak Detection Solution (Instructions on how to make
solution are included in step Operations Section)
• (1) Precision Filled LP Gas Grill Tank with Acme Type 1 external
threaded valve connection (4-5 gallon size)
Note: You must follow all steps to properly assemble heater.
Typical assembly: approximately 20 minutes.
3
Attach Emitter Assembly
A
x 4
Outdoor Patio Heater Model No. 62100, 62900, 82300, 82300C, GWT501A & GWT801B
2
4
Attach Engine Assembly
A
x 4
Attach Top Wire Guard