Olympus TG-320 Instruction Manual page 66

Using a new card Using a new card
• Cards must be formatted with this camera before
fi rst use or after being used with other cameras or
computers.
[Memory Format]/[Format] (p. 47)
• When using the Eye-Fi card, read the instruction
manual of the Eye-Fi card carefully, and comply
with the instructions.
Checking the image saving location Checking the image saving location
The memory indicator shows whether the internal
memory or card is being used during shooting and
playback.
Current memory indicator
v: Internal memory is being used
w: Card is being used
00:34 00:34
4 4
14
M
Shooting mode
Even if [Memory Format]/[Format], [Erase], [Sel.
Image], or [All Erase] is performed, the data in the
card is not completely erased. When disposing of the
card, damage the card to prevent the disclosure of
personal data.
66 EN
Current memory
indicator
P P
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
4/30 4/30
'11/02/26 '11/02/26 00:00 00:00
Playback mode
Readout/recording process of the card Readout/recording process of the card
During shooting, the current memory indicator lights
up red while the camera is writing data. Never open
the battery/card/connector cover or unplug the USB
cable. This can not only damage the image data but
also render the internal memory or card unusable.
00:34 00:34
4 4
Lights up red
14
M
P P
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO