Olympus TG-320 Instruction Manual page 31

When set to [Auto] or [Manual], [Image Size]
(p. 39) is fi xed to [2].
The focus, exposure, zoom position (p. 21), and white
balance (p. 36) are locked at the fi rst frame.
The fl ash (p. 34) is fi xed to $ (Flash Off) mode.
Taking pictures with [Auto] Taking pictures with [Auto]
1 Press the shutter button to take the fi rst frame.
2 Move the camera slightly in the direction of the second
frame.
Target mark
Pointer
3 Move the camera slowly while keeping it straight, and
stop the camera where the pointer and target mark
overlap.
●
The camera releases the shutter automatically.
To combine only two pictures, press the A button
before taking a third frame.
4 Repeat Step 3 to take a third frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
AUTO AUTO
Cancel MENU Save
Screen when combining images
from left to right
AUTO AUTO
Cancel MENU Save
To exit the panorama function without saving an
image, press the m button.
If the shutter does not automatically release, try
[Manual] or [PC].
Taking pictures with [Manual] Taking pictures with [Manual]
1 Use FGHI to specify at which edge the next
picture is to be connected.
Direction for
combining the next
frame
2 Press the shutter button to take the fi rst frame.
OK
1st frame
3 Compose the next shot so that joint area 1 overlaps
joint area 2.
OK
Set OK
Joint areas
MANUAL MANUAL
1 1
Cancel MENU
1 1
Cancel MENU
Composition of the 2nd frame
MANUAL MANUAL
MANUAL MANUAL
2 2
Save OK
MANUAL MANUAL
2 2
Save OK
31
EN