Automatic Memory Of Station Presets; Tuning To Preset Stations - Alpine CDA-7892 Owner's Manual

Automatic Memory of Station Presets

1
Press the SOURCE button to select the radio mode.
2
Press the BAND button repeatedly until the desired
radio band is displayed.
3
Press and hold the A. ME button for at least 2 seconds.
The frequency on the display continues to change
while the automatic memory is in progress. The tuner
will automatically seek and store 6 strong stations in
the selected band. They will be stored into buttons 1 to
6 in order of signal strength.
When the automatic memory has been completed, the
tuner goes to the station stored in the preset location
No. 1.
NOTE
If no stations are stored, the tuner will return to the original
station you were listening to before the auto memory procedure
began.

Tuning to Preset Stations

1
Press the SOURCE button to select the radio mode.
2
Press the BAND button repeatedly until the desired
band is displayed.
3
Press the station Preset button that has your desired
radio station in memory.
The display shows the band, preset number with a
triangle and frequency of the station selected.
19
-EN