Olympus SP 500 - UZ Digital Camera Quick Start Manual

1AG6P1P2778--

GET STARTED

a. Attach the strap and

lens cap

1 2
4
3

TAKE A PICTURE

a. Zoom
Zoom Out: Zoom In:
4 4
SQ1 SQ1 1600 1600×1200 1200 SQ1 SQ1 1600×1200 1600 1200
REVIEW OR ERASE A PICTURE
a. Press the QUICK VIEW button
The last picture taken will be displayed.
Zoom Lever
QUICK VIEW
Button
Previous Next
Picture Picture
Arrow Pad

TRANSFER IMAGES

a. Install the software
1
Insert the OLYMPUS Master CD-ROM.
2
Windows:
Click the "OLYMPUS
Master" button.
Macintosh:
Double-click the "Installer"
icon.
3
Simply follow the on-screen
instructions.
Remember to register your camera when you install OLYMPUS
Master or visit:
www.olympusamerica.com/prodreg
Printed in Japan
VH253801
Digital Camera
Items not shown: Advanced Manual (CD-ROM), Basic Manual, warranty card. Contents may vary depending on purchase location.
b. Insert the batteries
1
Unlock
3
Lift
2
Slide
b. Focus
1
Using the monitor, place the AF target
mark over your subject.
Green Lamp
(Pressed Halfway)
4 4
SQ1 SQ1 1600 × 1200 1600 1200
Shutter Button
AF Target Mark
2
Press and hold the shutter button halfway
to lock the focus.
The green lamp indicates the focus and
4 4
exposure are locked.
b. Take a closer look
Pull the zoom lever
toward T or W to
zoom in or out.
Press Z to return
to the original size.
Press the arrow pad
(s/r/p/q) to
scroll around.
1
Display the picture you want to erase.
2 Press the S button.
Press the QUICK VIEW button
3
Select [YES], and press Z.
again to return to shooting
mode.
b. Connect the camera to the computer
1
Connect the camera and computer using the USB cable (included).
The monitor will turn on automatically.
2
Select [PC] on the monitor, and press Z.
Your PC will now recognize your camera as a
removable storage drive.

BEFORE YOU BEGIN

Gather these items (box contents)
Lens Cap/ Strap AA (R6) Alkaline Batteries
Lens Cap String
1
Set the mode dial to h, and press the
POWER button to turn the camera on.
2
Press
[MODE MENU] > [SETUP] > [X].
3
Press s/r to set an item. Press p/q to
select the next field.
4
Insert
c. Take the picture
1
Press the shutter
button completely to
take the picture.
(Pressed Completely)
Shutter Button
c. To erase a picture
ERASE
YES
NO
SELECT GO OK
S Button
The picture is permanently erased.
1
2
USB Cable
USB
P C
EASY PRINT
CUSTOM PRINT
EXIT
SELECT GO
USB Cable
(four)
c. Set the date and time
Z
to display the top menu, and select
PIXEL MAPPING
2005 . 01 . 01
'05.01.01
00:00
DUAL TIME OFF
SETUP
m/ft m
SELECT
Operation guide

CAMERA DIAGRAM

Strap Eyelet Shutter Button
Microphone
DC-IN Jack
Card Cover Self-Timer Lamp/
Card Slot AF Illuminator
POWER Button
Viewfinder
# Button (Flash pop-up)
DISP./GUIDE Button
QUICK VIEW Button
Z Button (OK/MENU)
Monitor
Tripod Socket
c. Transfer images to the computer
1
With the camera now connected,
open OLYMPUS Master.
The [Transfer Images] window is
displayed.
2
Select the images you want to
transfer, and click the [Transfer
Images] button.
If the [Transfer Images] window is not
displayed automatically:
a. Click the "Transfer Images" icon
on the OLYMPUS Master main
menu.
b. Click the "From Camera" icon.
OK
AV Cable OLYMPUS Master
Software CD-ROM
POWER Button
Mode Dial
Z Button
Date format
Y M D
00 : 00
SET GO OK
Multi-Connector
Flash Strap Eyelet
Lens Speaker Connector Cover
Zoom Lever
Mode Dial
[ Button/
Custom Button
< Button (Print)
u Button
(Monitor/Viewfinder)
# Button (Flash Mode)
S Button (Erase)
Card Access Lamp
Arrow Pad
(s/r/p/q)
Battery Compartment
Lock
Battery Compartment
Cover
[Transfer Images] window
[Transfer Images]
button
© 2005