Operating The Camera - Olympus IR 500 - 4MP Digital Solutions Camera Reference Manual

Operating the camera

You can use the remote control to play back images on the camera monitor or TV screen. The
same operations (such as selecting or deleting images, etc.) can be performed in the same manner
as the camera buttons.
When using the remote control, set the camera on the cradle.
1
Connect the AC adapter to the cradle, and set the camera on the cradle.
Set the camera with the multi-swing display raised and the remote control window facing
forwards.
Turn the camera connector
dial of the cradle to this mark.
2
Make sure that the camera is turned on.
• The mode selection screen appears.
• If the camera is turned off, press the power switch on
the camera or POWER button on the remote control.
• If the storage unit is connected, the "QDOCK
MODE" screen appears. Select "EXIT," then press
9 to exit the screen.
3
Press the a or c button on the remote control to select the desired
mode.
STORAGE:
REPLAY:
ALBUM:
CALENDAR:
CLOCK:
Displays the data on a Dock&Done-compatible storage unit.
Displays the images on the camera.
Displays the images on the camera in the album display mode.
Displays the images on the camera in the calendar display mode.
Displays the clock.
Operating the camera
Power lamp/
Remote control lamp
Remote control window
SELECT MODE
STORAGE
REPLAY
ALBUM
CALENDAR
SELECT GO
21