Electrolux E23CS78GPS Use & Care Manual page 15

Using The Alarm Reset Button
You can disable or activate the alarm system by pressing and holding the Alarm
Reset button for three seconds. Use it, for example, to turn off audible tones and/
or flashing indicator lights.
CA CA UTION UTION
CA CAUTION CA UTION UTION
!
The alarm system does not automatically reset if you disconnect and reconnect your
refrigerator's power cord. It can only be reactivated by pressing the Alarm Reset button.
Once you disable the alarm system, you must again press and hold the Alarm
Reset button for three more seconds to reset (activate) the alarm system. The On
indicator light remains off while the Freezer and Fresh Food compartments cool
toward the current temperature settings. When temperature settings are reached,
the On light displays green to indicate an active alarm system.
Checking the Air Filter Status
Your refrigerator's fresh food air filter needs to be
replaced from time to time. You can monitor the need
for replacement by pressing and holding the Air Filter
On/Off button for three seconds.
To check the air filter status:
1 Press the Air Filter On/Off button. This activates a
test cycle, and one of the three filter status lights
displays, indicating one of the following:
Filter OK Air filter does not need changing.
Order Filter Air filter is about 80 percent used. Please order new one.
Change Filter Air filter is 100 percent used. Please change now.
2 Press the Air Filter On/Off button to turn off the status light.
Controls & Settings
15
Air Filter On/Off Button
Indicator Lights