Table of Contents
Advertisement
To carry out the following operations, we suggest that this be made with another person
that will keep a firm hold on the doors of the appliance during the operations.
1.
Open the doors. Unscrew the middle
hinge (m2). Remove the plastic spacer
(m1).
2.
Remove the spacer (m6) and move to the
other side of the hinge pivot (m5).
3.
Remove the doors.
4.
Remove the left-hand cover pin of the
middle hinge (m3,m4) and move to the
other side.
5.
Fit the pin of the middle hinge (m5) into
the left-hand hole of the lower door.
6.
Remove using a tool the cover (b1). Un-
screw the lower hinge pivot (b2) and the
spacer (b3) and place them on the op-
posite side.
7.
Re-insert the cover (b1) on the opposite
side.
Installation
m1
m2
m6
m5
m4
m3
b1
b2
b3
19
Advertisement
Table of Contents
