Panasonic Viera DT50A series Operating Instructions Manual page 48

Menu Item
Teletext
Teletext
Preferred Subtitles
Input Labels
Banner Display
Timeout
VIERA Connect
Banner
Playing Time
Display
VIERA Link
HDMI Content Type
Power on Link
Power off Link
Standby Power
Save
Intelligent Auto
Standby
48
Adjustments / Configurations (alternatives)
This item is not used for this model.
Teletext display mode [FASTEXT] / [List] (p. 28)
Selects the preferred language for Digital TV subtitles (depending on the
broadcaster)
Accesses the input labels list to select the label of each input mode or set to skip
unconnected one for easier identification and selection in [Input Selection] (p. 30)
or banner
●
To name each input mode freely, select [User input] and set characters
(maximum 10 characters).
●
To skip the input mode, select [Skip].
Sets how long the Information banner stays on screen
[0 (No display)] / [1] / [2] / [3] / [4] / [5] / [6] / [7] / [8] / [9] / [10] (seconds)
Sets the VIERA Connect introduction banner display [Off] / [On] (p. 20, 21)
Set to [On] to display a continuous record of time spent using Game mode in the
top right of the screen every 30 minutes [Off] / [On]
●
This function is available when [Viewing Mode] is set to [Game].
Sets to use VIERA Link functions [Off] / [On] (p. 90)
Automatically adjusts the picture settings according to the received HDMI content
via HDMI cable [Off] / [Auto]
● This function is available if the connected equipment supports HDMI Content
Type.
● The content type information will be displayed for several seconds when this
function works.
Sets to use Power on Link functions [Off] / [On] (p. 90)
Sets to use Power off Link functions [Off] / [On] (p. 90)
Controls the connected equipment to reduce power consumption in Standby
[Off] / [On] (p. 91)
●
This function is available when [VIERA Link] is set to [On] and [Power off Link]
is set to [On].
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)] (p. 91)
● This function is available when [VIERA Link] is set to [On].
(p. 42)
∗
●
●