Panasonic Viera DT50A series Operating Instructions Manual page 47

Menu Item
Auto Standby
Auto Standby
Eco Navigation
Eco Navigation
Recording Setup
Child Lock
Favourites Edit
Channel List
Auto Tuning
Manual Tuning
Update Channel
List
New Channel
Message
Signal Condition
Add TV Signal
Adjustments / Configurations (alternatives)
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
● Starting Timer Programming automatically does not affect this function.
●
Automatic input switching with the connected equipment affects this function
and time-count will be reset.
●
The notification message will appear 3 minutes before going into Standby mode.
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
● Automatic input switching with the connected equipment affects this function
and time-count will be reset.
● The notification message will appear 3 minutes before going into Standby mode.
Automatically sets the TV to the most suitable energy-saving mode
●
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save], [Power
Save] [On]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
[Front Logo LED] [Off]
Automatically sets the TV to the most suitable energy-saving mode
● If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save] [On]
[Intelligent Auto Standby]
[Auto Standby] [2 hours]
Settings for the recording feature of the USB HDD / SD Card (p. 63 - 65)
Applies access control for channels or inputs to prevent unwanted access (p. 57)
Creates a list of favourite channels (p. 50)
●
For Digital TV
Skips the unwanted channels or edits channels (p. 51)
Automatically searches for the receivable channels (p. 52)
Searches for the channels manually (p. 52)
Updates the channel list while keeping your settings (p. 53)
●
For Digital TV
Selects whether to give a notification message when a new channel is found
[Off] / [On] (p. 53)
● For Digital TV
Checks the signal condition (p. 53)
● For Digital TV
Adds the TV mode
● This function is available if you skip any modes to tune in [Auto Tuning] for first
using the TV.
● To operate, refer to the "Auto Tuning" operations for first using the TV (p. 17).
[On (No reminder)]
[On (No reminder)]
47