Panasonic HC-X900 Operating Instructions Manual page 69

[ZEBRA]
Parts where white saturation (colour saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed
with diagonal lines (zebra pattern).
≥ Switch to Manual Mode. (l 74)
: [RECORD SETUP] # [ZEBRA] # [ON]
MENU
≥ It is possible to set from the quick menu in Manual
Mode. (l 33)
≥ You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (Iris/Gain) (l 77).
≥ The zebra pattern does not appear on the images actually recorded.
[LUMINANCE]
Displays the luminance level of the centre of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance
level of the object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (l 77)
≥ Switch to Manual Mode. (l 74)
: [RECORD SETUP] # [LUMINANCE] # desired setting
MENU
≥ It is possible to set from the quick menu in Manual Mode. (l 33)
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l 77)
[ANYTIME]:
Constantly display.
[OFF]:
Cancel the setting.
A Luminance display frame
B Luminance level
≥ Luminance level is displayed between 0% and 99%. It will be displayed as 99% when it is
over 99%.
[HISTOGRAM]
A graph with brightness as horizontal axis and number of pixels at that brightness as vertical
axis is displayed. It is possible to determine the exposure of the whole image by looking at
the distribution in the graph.
Adjust the brightness using [IRIS]. (l 77)
≥ Switch to Manual Mode. (l 74)
- 69 -
A Zebra pattern
50%