Panasonic HC-X900 Operating Instructions Manual page 154

Problem
Although this unit is
correctly connected to a
TV, images cannot be
seen.
The images are
squeezed horizontally.
If the SD card is inserted
in another device, it is
not recognised.
VIERA Link does not
work.
The power of the DVD
burner cannot be turned
on.
Cannot copy scenes on
the SD card by
connecting to other
equipment with the USB
cable.
Problem
When connected by the
USB cable, this unit is
not detected by the PC.
With other products
≥ Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
≥ Change the [TV ASPECT] setting to match the aspect
ratio of the TV. (l 104)
≥ Change the setting of the unit depending on the cable
connecting to the TV. (l 105, 106)
≥ Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card/
SDXC Memory Card) that you inserted. Refer to the
operating instructions of the device for details.
(Setting on this unit)
≥ Connect with a HDMI mini cable (optional). (l 107)
, then touch [SETUP] # [VIERA Link] #
≥ Touch
MENU
[ON]. (l 107)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the
input using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the
connected device.
≥ When the unit is connected to the DVD burner, use the
respective AC adaptors for both this unit and the DVD
burner.
≥ Other equipment might have not recognised the SD card.
Unplug the USB cable once, and reconnect it.
With a PC
≥ After re-inserting the SD card into the unit, reconnect the
supplied USB cable.
≥ Select another USB terminal on the PC.
≥ Check the operating environment. (l 137, 145)
≥ Connect the supplied USB cable again after restarting the
PC and turning on this unit again.
- 154 -
Check points
Check points