Hdmi Monitor Setup - Integra DTR-7.8 Instruction Manual

First Time Setup —Continued

HDMI Monitor Setup

On Standby
DVD VCR DVR CBL SAT
/ /
1 2 3
Game / TV AUX 1 AUX 2
4 5 6
Tape Tuner CD
7 8 9
Phono D.TUN
+10 0 Clear
--/--- 10 11
Input Selector
Macro
1 2 3
Remote Mode
DVD VCR CD
CDR/MD
TV Cable Dock
SAT
Dimmer
2, 3
+
CH
Enter
Disc
Album
-
1, 6
Prev
CH
Display
Rec Playlist
Listening Mode
Stereo Surround
Repeat Audio Subtitle
Direct THX
If you connect your TV to the COMPONENT VIDEO
MONITOR OUT 1 or COMPONENT VIDEO MON-
ITOR OUT 2/ZONE 2 OUT, set the HDMI Monitor set-
ting to No so that the onscreen setup menus are displayed
and composite video and S-Video sources are upcon-
verted and output by the COMPONENT VIDEO MON-
ITOR OUT 1 and COMPONENT VIDEO MONITOR
OUT 2/ZONE 2 OUT.
If you connect your TV to the HDMI OUT, set the HDMI
Monitor setting to Yes so that the onscreen setup menus
are displayed and composite video, S-Video, and com-
ponent video sources are upconverted and output by the
HDMI OUT.
1 Press the [Receiver] button, fol-
lowed by the [Setup] button.
Receiver
The main menu appears onscreen.
TV
Input
+
TV CH
-
TV VOL
12
Zone 3
Zone 2
1
Receiver
Tape/AMP
Sleep
2–5
VOL
Muting
Random
Play Mode
All ST
2
Use the Up and Down [
buttons to select "1. Input/Output
Assign," and then press [Enter].
Enter
The Input/Output Assign menu
appears.
Enter
3
Use the Up and Down [
buttons to select "1. Monitor
Out," and then press [Enter].
Enter
The Monitor Out menu appears.
1-1.Monitor Out
HDMI Monitor
Enter
4
Use the Up and Down [
buttons to select "HDMI Monitor,"
and use the Left and Right
Enter
[ ]/[ ] buttons to select:
No: Select this if your TV is con-
nected to the COMPONENT
VIDEO MONITOR OUT 1,
COMPONENT VIDEO
MONITOR OUT 2/ZONE 2
Enter
OUT, S MONITOR OUT, or
V MONITOR OUT.
Yes: Select this if your TV is con-
nected to the HDMI OUT.
Note:
• When Yes is selected, the onscreen
setup menus are output by only the
HDMI OUT. If you're not using
the HDMI OUT and select Yes by
mistake and the menus disappear,
turn off your components, connect
the AV receiver to your TV with a
composite video or S-Video cable,
and then change this setting back
to No.
]/[ ]
]/[ ]
Yes
]/[ ]
45