Connecting To An External Amplifier (Power Ic); Setting The Aux+ Setup Mode; Setting The Aux Name Mode - Alpine 68-14470Z98-A Owner's Manual

Connecting to an External Amplifier (POWER IC)

POW ON (Initial setting) / POW OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
POW OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit's internal amplifier is
turned OFF and cannot drive speakers.
POW ON : The speakers are driven by the built-in
amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Speakers
Front
right
Rear
right
Rear
left
Front
left

Setting the AUX+ SETUP Mode

AUX+ ON / AUX+ OFF (Initial setting)
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCE-237B) for building up the AUX IN (optional) is required.
A portable music device and an iPhone/iPod cannot be connected to the
Full Speed connector at the same time.
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.
You can change the AUX+ name display when AUX+ SETUP is set to
/ / ENT
ON. Press when AUX+ SETUP is set to ON, and select
AUX+ NAME by turning the Rotary encoder, then press
After that, turn the Rotary encoder to select the desired AUX+ name.

Setting the AUX NAME mode

1
AUXILIARY* (Initial setting) / TV / DVD / PORTABLE*
You can change the AUX NAME display in the SETUP mode.
1
* After the setting is completed, AUX is displayed on the unit.
2
* After the setting is completed, PMD is displayed on the unit.
is pressed and AUX+ is selected, the
/ /
2
/ GAME
17
ENT .
-EN