Valet Mode - Black Widow Security BW X-Z Series System Manual

VALET MODE

When the system is placed into the Valet Mode
the security and remote start features will be
disabled. However, the optional keyless entry
and trunk release features will still function if
installed.The valet mode may be accessed with
either the valet switch or a remote transmitter.
To enter or exit valet mode using the switch:
1. Be sure the system is disarmed.
2. Turn ignition on.
3. Press and hold the valet switch for 3
seconds.
• The siren will chirp 3 times to enter or
exit valet.
4. Turn ignition off.
• The LED will turn on solid indicating
the system is in valet mode, or turn off
indicating valet mode exit.
To enter or exit valet mode using the remote:
1. Press and hold button 1 for level shift.
2. Press button 1 again to turn valet mode.
• The parking lights will flash 4 times to
enter and 3 times to exit valet.
• The LED will turn on solid indicating
the system is in Valet Mode, or turn off
indicating Valet Mode exit.
• The optional 2-way LCD transmitter
display will show "zzz" for valet .
OPTIONAL TRUNK RELEASE
The activate the system's auxiliary feature (or
trunk release) press button 3 for level shift,
then press button 3 again. If the vehicle's trunk
pin is connected to the alarm, the optional 2-
way LCD transmitter will show the trunk open.
OPTIONAL TRUNK DISARM
The trunk disarm feature allows the alarm to
disarm automatically when the auxiliary output
is used to activate the optional trunk release.
This eliminates having to first disarm the alarm
before activating the trunk release.
NOTE: This feature must be programmed
during installation and only functions if auxiliary
is programmed for momentary output.
CAR LOCATOR FEATURE
The activate the system's car locator feature
press button 3 twice rapidly. The siren will
chirp and the parking lights will flash 6 times.
REMOTE SENSOR BYPASS
To bypass the shock sensor's warn-away while
the system is armed, press button 1 twice
rapidly. To bypass the sensor completely, press
button 1 twice again. Pressing button 1 twice a
third time will re-activate the sensor. The
parking lights will flash to indicate the mode:
One Flashes = Normal
Two Flashes = Sensor 1 Warn away Bypass
Three Flashes = Sensor 1 Complete Bypass
If an optional dual-zone sensor is connected to
the optional sensor port, that sensor's warn-
away feature can be bypassed while the system
is armed by pressing button 4 twice rapidly. To
bypass the sensor completely, press button 4
twice again. Pressing button 4 twice a third
time will re-activate the sensor. The parking
lights will flash to indicate the mode:
Four Flashes = Sensor 2 Warn away Bypass
Five Flashes = Sensor 2 Complete Bypass
NOTE: The system must be armed for at least
10 seconds prior to activating the remote
sensor bypass feature.
ANTI-CARJACK FEATURE
When selected, the optional anti-carjacking
feature monitors the vehicle's doors while the
ignition is on. If a door is opened, the anti-
carjacking feature will trigger, with progressively
higher levels of alert. The Anti-Carjacking feature
must be enabled during installation.
4