System Programming - Black Widow Security BW X-Z Series System Manual

SYSTEM PROGRAMMING

Entering Programming
To enter System Programming
1. Turn on ignition.
2. Within 5 seconds, press valet the proper
number of times for the desired mode:
5 presses = Alarm Programming
10 presses = Remote Start Programming
• The siren will chirp to indicate
programming mode entered:
5 chirps = Alarm Mode
10 chirps = Remote Start Mode
3. Press the valet switch the number times
equal to the Feature you want to change.
• The siren will chirp each time the valet
switch is pressed. A long chirp is equal to
5 presses. (Example: step 7 = 1 long chirp
and 2 short chirps.)
4. Within 5 seconds, press the transmitter
button corresponding to the desired
operating mode for that Feature.
• The siren will chirp either 1, 2, 3, or 4
times to indicate the button setting.
5. Repeat steps 3 and 4 to change additional
features.
6. Turn off ignition to save changes.
ALARM PROGRAMMABLE FEATURES
Step Function
1. Auto Rearming
2. Blue Wire Activation
3. Ignition Lock/Unlock
4. Door Lock/Unlock Pulse
5. Passive Arm Locking
6. Override Mode
7. Open Door Report
8. Siren or Horn Mode
9. Auxiliary Output Timing
10. Starter Defeat Relay
11. Anti-Carjack Mode
12. Trunk Disarm Feature
Complete Default Reset
Follow this procedure to set the Programming
Features to factory default settings.
1. Enter Alarm or Remote Start Feature
program mode.
2. After entering programming mode, press
Transmitter Button 1.
• The siren will chirp once indicating the
• All Programming options are now set to
3. Turn ignition off.
Alarm Programmable Features
1. Auto Rearm. Automatically rearms the
system in case of accidental disarming. The
system must be armed for at least 10 seconds
before disarming, and the hood/trunk must not
be opened or Auto Rearm will be bypassed.
Auto Rearm with Lock will also lock the doors
upon rearming.
2. Blue Wire Programming. Selects between a
20 or 30 second output after disarming for
Dome light operation (default), and a 20 or 30
second output after arming for window roll-up.
3. Ignition Lock/Unlock. Automatically locks
the doors when ignition is turned on and
Button 1 Button 2
Off On/No Lock
Disarm 20s Disarm 30s
Brake/On On/On
1secL/1secUL 3secL/3secUL
No Lock Lock
No PIN Code PIN Code
60 seconds Instant
Siren Horn
Momentary 10s Timed
Normally Closed Normally Open
Off On
Off On
16
reset signal was received.
factory default settings.
Button 3
On/Re-Lock
Arm 20s
On/Off
1secL/1secULx2 30secL/1secUL
30 seconds
30s Timed
Button 4
Arm 30s
Off/Off
45 seconds*
Latched