Mazda 626 Owner's Manual page 272

J94A5020
10. Insert the lug wrench into the jack
and turn it clockwise until the tire
just clears the ground, less than
25 mm (1 in). Before removing
the lug nuts, make sure your
Mazda is firmly in position and
that it cannot slip or move.
Form No. 8P95-EA-00G
n076-13D1E
11. Remove the lug nuts by turning
them counterclockwise; then
remove the wheel.
12. Mount the spare tire.
13. Install the lug nuts with the
beveled edge inward; tighten
them by hand.
In Case of Emergency
J94A5021
(J18Y5036)
14. Turn the lug wrench
counterclockwise and lower the
vehicle. Use the lug wrench to
tighten the nuts in the order
shown.
6-25