Mazda 626 Owner's Manual page 270

! CAUTION
(Center Cap)
There is a valve-stem mark inside
the center cap. When installing the
center cap, align this mark with the
tire's valve stem.
(Wheel Cover)
Align the notch on the wheel cover
with the valve stem when
installing it.
Damage could occur during
installation if the center cap or
wheel cover is not properly
aligned.
Form No. 8P95-EA-00G
Q076-23CE
8. Loosen the lug nuts by turning
them counterclockwise one turn
each, but don't remove any until
the tire has been raised off the
ground.
In Case of Emergency
076-10A1E
J94A5018
J94A5019
Lug wrench
9. Place the jack under the jacking
position closest to the tire being
changed.
076-11EE
Jacking position
6-23