Table of Contents
Advertisement
Programmable Features
Step
Function
1. Arming Mode
2. Parking Light Output
3. Auto Rearm
4. Arming Chirps
5. Trunk Disarm
6. Ignition Locking
7. Ignition Unlocking
8. Door Unlock Pulse
9. Passive Locking
10. Open Door Report
11. Siren / Horn Chirps
12. Auxiliary 1 Output
13. Auxiliary 2 Output
14. Auxiliary 3 Output
15. Auto Activate Aux 2
16. Entry Delay w/Passive Off
17. Horn Honk Output
18. Car Jack Mode
Active. Pressing transmitter button 4 with the
ignition on will manually activate the Anti-
Carjacking feature.
Passive. When selected, the Anti-Carjacking
feature will activate whenever a door is
opened while the ignition is on.
Full-time. When selected, the Anti-Carjacking
feature will automatically activate each time
the ignition is turned on.
Adjusting Sensors
The sensor test mode allows quick and easy
sensor tuning.
To adjust the sensor(s):
1. Turn on the ignition.
2. Press Transmitter Button 5 then button 4.
3. Test the sensors.
• The siren chirps indicate the zone.
Short chirp = warn (shock/optional)
Button 1 (default) Button 2
Active
Flash twice
Off
Normal
Off
On
All doors
1sec L/1sec UL
Off
10 seconds
Siren only
Momentary
Momentary
Momentary
Off
Flashing
Off
Button 3
Passive
Passive w/count
30 seconds
Auto rearm
Auto rearm w/lock
Silent
On
Off
Driver only
Off
3sec L/3sec UL 1 secL/1 ec UL x2 30sec L/1sec UL
On
60 seconds
Horn chirps
Horn chirps w/warn
Timed
Latched
Timed
Latched
Timed
Latched
On Arming
On Disarming
On
Continuous
Active
Passive
Long chirp = Shock Trigger
2 long chirps = Optional Trigger
4. Turn off the ignition.
Testing System
Arm and disarm system, checking that the
siren chirps and parking lights are functioning
normally. Make sure that the programmed
features are performing correctly, ie.: ignition
locks, passive arming, passive locks, etc. Test
the doors and hood/trunk inputs (make sure
all doors trigger the system, not just the
drivers door). Arm the system and try
starting the vehicle, it should not start.
Disarm the system using the emergency
override. Check the range of the remote
transmitters. Make sure the customer has
physical knowledge of the location of the
valet/override switch.
9
Button 4
Ignition latched
Full-time
Advertisement
Table of Contents
