Olivetti d-Copia 2000 Operation Manual page 91

Auto Cassette Switching
Auto Sizing
Inputting Custom Sizes
OPERATION GUIDE
NOTE:
The range of selection will vary in accordance with the number of
cassettes installed.
5
Press [OK]. The display will return to that of Step 2.
When the optional Paper Feeder has been installed, select whether or not
to use the Auto Cassette Switching function.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display
17.AutoCassetSet.
3
Press [OK].
4 Press or and select Disting. paper when the Auto Cassette
Switching function is to be used and Not dist. paper when it will not
be used.
5
Press [OK]. The display will return to that of Step 2.
Sets whether or not to use automatic sizing (zoom/reduction percentage)
when a paper cassette has been selected.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display
18.PriorAutoZoom.
3
Press [OK].
4
Press or and select On when the Automatic Sizing function is to be
used and Off when copies are to be taken at a 1:1 ratio.
5 Press [OK]. The display will return to that of Step 2.
Sizes that are not displayed on the Operation Panel are registered as
Custom Sizes.
System Setting
System Menu:
17.AutoCassetSet
System Menu:
18.PriorAutoZoom
5-15