Increasing Speed While Using Speed Control; Reducing Speed While Using Speed Control; Turning Off Speed Control - Mazda B4000 Owner's Manual

Increasing speed while using speed control

There are three ways to set a higher
speed:
Press and hold the SET + control
until you get to the desired
speed, then release the control.
Press and release the SET +
control to operate the Tap-Up function. Each tap will increase the set
speed by 1.6 km/h (1 mph).
Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed press and release the SET + control.

Reducing speed while using speed control

There are three ways to reduce a
set speed:
Press and hold the CST - control
until you get to the desired
speed, then release the control.
Press and release the CST -
control to operate the Tap-Down
function. Each tap will decrease the set speed by 1.6 km/h (1 mph).
Depress the brake pedal or the
clutch pedal (if equipped) until
the desired vehicle speed is
reached, press the SET + control.

Turning off speed control

There are three ways to turn off the speed control:
Depress the brake pedal or the clutch pedal (if equipped). This will
not erase your vehicle's previously set speed.
Driver Controls
51