Overheating - Mazda B4000 Owner's Manual

Roadside Emergencies
Fuse/Relay
Location
42
43
44
45A
45B
46A
46B
47
48A
48B
51
52
53
54
55
56
* Mini Fuses ** Maxi Fuses

OVERHEATING

If the temperature gauge indicates overheating and you experience
power loss, you hear a loud knocking or pinging noise, the engine is
probably too hot.
If this happens:
1. Drive safely to the side of the road and park off the right-of-way.
2. Shift the automatic transmission into P (Park) or the manual
transmission into the neutral position, and apply the parking brake.
3. Turn off the air conditioner.
WARNING: Steam from an overheated engine is dangerous. The
escaping steam could seriously burn you. Open the hood ONLY
after steam is no longer escaping from the engine.
4. Check whether coolant or steam is escaping from under the hood or
from the engine compartment.
148
Fuse Amp Power Distribution Box
Rating
7.5A* Trailer tow (left turn)
— Not used
— Not used
— Wiper HI/LO relay
— Wiper Park/Run relay
— A/C clutch solenoid
— Washer pump relay
— PCM relay
— Fuel pump relay
— Fog lamp relay
— Not used
— Not used
— Not used
— Not used
— Blower relay
— Starter relay
Description