Page 1
Model SR5200 User Guide AV Surround Receiver...
Page 2
Kvitto eller faktura är tillräokligt bevis fö detta. NEDERLANDS DANSK GARANTIE Voor inlichtingen omtrent garantie dient u zich tot uw plaatselijke Marantz. GARANTI UW KWITANTIE, KASSABON E.D. BEWAREN Henvend dem til Deres MARANTZ-forhandler angående inrformation om garantien.
Page 3
CE MARKING English The SR5200 is in conformity with the EMC directive and low-voltage directive. Français Le SR5200 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR5200 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte. Nederlands De SR5200 voldoet aan de EMC eisen en de vereisten voor laag-voltage.
Page 4
f g h DIGITAL FRONT IN/OUT TAPE MONI FRONT MONITOR TAPE VCR1 VCR1 ANTENNA SURR. DIG-4 IN SR5200 DSS/ DSS/ SURR. CENTER VCR2 VCR2 CENTER SURROUND DIG-3 IN VCR1 VCR1 VCR1 VCR1 WOOFER WOOFER DIG.OUT COAX DSS/ DSS/ DSS/ DSS/ CENTER SURR.
TABLE OF CONTENTS FOREWORD ..................................2 PRECAUTIONS ........................................2 INTRODUCTION ................................3 DESCRIPTION ................................. 3 FEATURES ..................................3 FRONT PANEL FEATURES ............................4 REAR PANEL CONNECTIONS ............................5 REMOTE CONTROL OPERATION ..........................7 OPERATION ..........................................7 FUNCTION AND OPERATION ....................................7 PROGRAMMING THE REMOTE CONTROLLER ..............................
EQUIPMENT MAINS WORKING SETTING Never place heavy objects on the equipment. Your Marantz product has been prepared to comply with the If a foreign body or water does enter the equipment, contact your household power and safety requirements that exist in your area.
INTRODUCTION FEATURES • Dolby Digital and DTS surround sound decoding, plus Dolby Pro Thank you for purchasing the Marantz SR5200 DTS/Dolby Digital LogicII decoding and a variety of additional surround modes. Surround receiver. This remarkable component has been engineered to provide you with •...
i S. ( Source) DIRECT button FRONT PANEL FEATURES (SEE When this button is pressed, the tone control circuit is bypassed as PAGE iii.) well as Bass Management. Notes: The surround mode is automatically switched to AUTO when the q POWER switch and STANDBY indicator source direct function is turned on.
¡2 REMOTE CONT. IN/OUT terminals marked “AM” and “GND”. The supplied AM (MW/LW) loop antenna will provide good AM (MW/ Connect to a Marantz component equipped with remote control (RC- LW) reception in most areas. 5) terminals. Position the loop antenna until you hear the best reception.
Page 12
(RC-5) jacks, it allows system remote control to operate. Connect REMOTE CONTROL OUT jack of SR5200 to REMOTE CONT. IN of other Marantz equipment, i.e. CD player or tape deck, by using an RCA pin cable. Note:...
. Numeric buttons 1 to 9 (A, B, C ... Z, –) / REMOTE CONTROL OPERATION Surround mode buttons Numeric buttons OPERATION These buttons are used to enter figures in the selection of a tuner preset The provided remote control unit is a universal remote controller. The station and station name preset or to set select a CD track number, etc.
⁄7 CLEAR button PROGRAMMING THE REMOTE CONTROLLER This button is used to cancel for certain memory or programming The remote controller RC5200SR must be programmed to use the operations. codes for your appliances of different brands. This is done by keying in a 4-digit code or by scanning the codes until the correct one is found.
Once you have found and the codes for your various appliances, you OPERATION OF REMOTE CONTROL UNIT may want to write them down here. 1. Remote control The distance between the transmitter of the remote control unit and the IR SENSOR of the SR5200 should be less than about 5 meters. If the transmitter is pointed to a direction other than the IR SENSOR or if there is an obstacle between them, remote control may not be possible.
SET-UP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR5200 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote controller. The settings made with these buttons are also shown in the on-screen display.
SYSTEM SETUP 2/2 (SELECTING THE DIGITAL INPUT) OSD MAIN MENU Four digital inputs can be assigned for the desired source. Press the AMP button c. Use this menu to determine which source is connected to which input. Press the MENU button n to display the “MAIN MENU” of the on- Example;...
FRONT -L/R : Select the type of front speakers with button. SPEAKERS SETUP CENTER : Select the type of center speaker with button. The home theater system you already have installed should function SURR-L/R : Select the type of surround speakers with button.
SURROUND MODE SOURCE DIRECT : Switch the source direct ON or OFF with button. This bypasses the surround processing and crossover for the main speakers (front left and right will be full range and the subwoofer will be ON) Note: Surround mode cannot be changed in Source Direct mode.
BASIC OPERATION 3. Recalling a Preset Station Press the F/P button !5 to change the display to preset. Select the desired preset station by pressing TUNING/PRESET LISTENING TO THE TUNER button !4 on the front panel or press CHANNEL button ⁄2 on the remote.
STATION NAME PRESET (On PRESET display mode) PROGRAMME TYPE (PTY) DISPLAY The station name preset function allows the name of each preset The RDS system categorizes programmes according to their genre channel to be entered using alphanumeric characters. The Station into different programme type (PTY) groups.
PLAYBACK OPERATION SETTING THE SLEEP TIMER Set the sleep timer while the power is turned on. NORMAL PLAYBACK Turn the power ON and press the SLEEP button o / ¤3 . Press the POWER button q / x. Press the SLEEP button o / ¤3 the number of times to set the Press the FUNCTION SELECTOR button t on the front panel or desired sleep time in minutes.
2. FUCTION SELECT & SURROUND MODE ON SCREEN DISPLAY INFOMATION When a function selector button or surround mode button is pressed The on-screen display, which can be activated by the Main unit or VIDEO: Displays the current video source. When TV,DSS, remote, appears on the TV screen to show the current setting status of DVD, VCR1 or AUX is selected with the function the SR5200.
Page 24
5.SLEEP TIMER When the SLEEP button o / ¤3 is pressed, the setting on or off and the remaining time of the sleep timer function are displayed. You can change the mode between on, off and the amount of time to elapse before the unit will shut itself off by cycling the SLEEP button o/¤3 .
SURROUND MODES The SR5200 incorporates digital signal processors (DSP) which can reproduce various surround effects you experience in concert halls and movie theaters, etc. These Surround Modes, are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. FEATURES Surroud mode When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, PCM-audio or DTS.
Page 26
The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector knob of the SR5200 or the remote control unit. However, the sound from the speakers depend upon the relationship between the selected surround mode and the input signal. They are as follows; Surround Input Signal Output Fluorescent Indicator...
Are the connections made properly ? Marantz distributor or the Marantz Service Center in your country. Are you operating the unit properly following user’s guide ? Are the power amplifiers and speaker working properly ?
Page 28
GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore: disconnect the plug from the AC line supply after waiting at least three minutes, reconnect the plug to the AC line supply re-attempt to operate the equipment Memory backup...
TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ..............................87.5 - 108.0 MHz Usable Sensitivity ............................. IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ............................ Mono/Stereo 76/72 dB Distortion ..............................Mono/Stereo 0.2/0.3 % Stereo Separation ................................ 1 kHz 45 dB Alternate Channel Selectivity ..........................± 300 kHz 60 dB Image Rejection ................................
Page 34
MILITARY MARKET EUROPE PASCO GmbH PO BOX 1280, Sandhausen 69200, Germany NETHERLANDS Marantz Domestic Sales A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands NEW ZEALAND Wildash Audio Systems 14 Malvern Road, Mt. Albert, Auckland, New Zealand...