Canon EOS Rebel SL1 18-55mm IS STM Kit Instruction Manual page 83

The Live View image shown with the ambience setting applied will not
look exactly the same as the actual photo.
Using flash may minimize the ambience effect.
In bright outdoors, the Live View image you see on the LCD monitor may
not have exactly the same brightness or ambience as the actual photo.
Set [52: LCD brightness] to 4 and look at the Live View image while the
LCD monitor is unaffected by outside light.
If you do not want the Live View image to be displayed when setting
functions, press the <Q> button after step 1 and set [Ambience-based
shots] and [Effect].
Press the <Y> <Z> keys or turn the
<6> dial to select the ambience.
The LCD monitor will display how the
image will look with the selected
ambience.
Set the ambience effect.
4
Press the <W> <X> keys to select
the effect bar so that [Effect] appears
at the bottom.
Press the <Y> <Z> keys or turn the
<6> dial to select the desired
effect.
Take the picture.
5
Press the shutter button completely to
take the picture.
To return to viewfinder shooting,
press the <A> button to exit Live
View shooting. Then press the shutter
button completely to take the picture.
If you change the shooting mode or
set the power switch to <2>, the
setting will revert back to [
Standard setting].
Shoot by Ambience Selection
83