Troubleshooting Guide
[###] is displayed.
If the card has recorded a number of images greater than the camera
can display, [###] will be displayed (p.
The LCD monitor does not display a clear image.
If the LCD monitor is dirty, use a soft cloth to clean it.
In low or high temperatures, the LCD monitor display may seem slow
or may look black. It will return to normal at room temperature.
[Eye-Fi settings] does not appear.
[Eye-Fi settings] will appear only when an Eye-Fi card is inserted in
the camera. If the Eye-Fi card has a write-protect switch set to the
LOCK position, you will not be able to check the card's connection
status or disable Eye-Fi transmission (p.313).
Playback Problems
Part of the image blinks in black.
It is the highlight alert (p.272). Overexposed highlight areas with a loss
of highlight detail will blink.
The image cannot be erased.
If the image is protected, it cannot be erased (p.266).
The movie cannot be played back.
Movies edited with a computer using the provided ImageBrowser EX
(p.366) or other software cannot be played back with the camera.
However, video snapshot albums edited with EOS Video Snapshot
Task (p.206) can be played on the camera.
340
249
).