Canon PowerShot N User Manual page 37

Shoot.
z z Press the shutter ring all the way down.
X X As the camera shoots, a shutter sound
is played, and in low-light conditions, the
flash fires automatically.
z z Keep the camera still until the shutter
sound ends.
X X Your shot is only displayed until the
camera is ready to shoot again.
Shooting Movies
Start shooting.
z z Touch [
recording begins, and [ Rec] is displayed
with the elapsed time.
X X Black bars displayed on the top and
bottom edges of the screen indicate
Elapsed Time
image areas not recorded.
X X Frames displayed around any detected
faces indicate that they are in focus.
X X In low-light conditions, the flash is
activated automatically, and [
displayed.
]. The camera beeps once as
] is
Resize the subject and
recompose the shot as needed.
z z
To resize the subject, repeat the
operations in step 3 (= 36).
However, note that the sound of camera
operations will be recorded, and movies
shot at zoom factors shown in blue will
look grainy.
z z When you recompose shots, the focus
stays the same but the brightness and
colors will be automatically adjusted.
Finish shooting.
z z Touch [ ]. The camera beeps twice as
recording stops.
z z Recording will stop automatically when
the memory card becomes full.
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot
Mode
3
Auto Mode/
Hybrid Auto Mode
4
Other Shooting
Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
37