Canon PowerShot N User Manual page 11

Inserting and Charging the Battery
Insert the included battery into the camera for charging. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
1
Open the cover.
z z Slide the cover ( ) and open it ( ).
2
Insert the battery.
z z While pressing the battery lock in the
direction of the arrow, insert the battery
as shown and push it in until it clicks into
the locked position.
z z If you insert the battery facing the wrong
way, it cannot be locked into the correct
position. Always confirm that the battery
is facing the right way and locks when
Terminals Battery Lock
inserted.
3
Close the cover.
z z Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
4
Connect the compact power
adapter to the camera.
z z
With the camera turned off, open the
cover ( ). With the smaller plug of the
included interface cable
orientation shown, insert the plug fully
into the camera terminal ( ).
z z Insert the larger plug of the interface
cable into the included compact power
adapter.
5
Charge the battery.
z z CA-DC30: Flip out the plug and plug the
compact power adapter into a power
outlet.
CA-DC30
z z
CA-DC30E: Plug the power cord into the
compact power adapter, and then plug
the other end into a power outlet.
CA-DC30E
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Basic Guide
(= 2) in the
Advanced Guide
1
Camera Basics
2
Creative Shot
Mode
3
Auto Mode/
Hybrid Auto Mode
4
Other Shooting
Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
11