Canon PowerShot N User Manual page 109

Low-Level Formatting
Perform low-level formatting in these cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing is
slower, continuous shooting is slower, or movie recording suddenly stops.
Low-level formatting erases all data on a memory card. Before low-level
formatting, copy images on the memory card to a computer, or take other
steps to back them up.
z z Touch the field to the left of [Low Level
Format] to select it (mark with a [
z z Follow steps 2 – 3 in "Formatting Memory
Cards"
formatting process.
• Low-level formatting takes longer than "Formatting Memory Cards"
because data is erased from all storage regions of the memory card.
• You can cancel low-level formatting in progress by touching [Stop]. In this
case, all data will be erased, but the memory card can be used normally.
Metric/Non-Metric Display
Change the unit of measurement shown in GPS information for elevation
(= 67) and elsewhere from m/cm to ft/in as needed.
z z
Choose [Units], and then choose [ft/in].
]).
(= 108) to continue with the
(= 108),
Increasing Touch-Screen Panel Sensitivity
Sensitivity of the touch-screen panel can be increased, so that the camera
responds to a lighter touch.
z z Choose [Touch Response], and then
choose [High].
Adjusting Wi-Fi Settings
The following options are available by choosing [Wi-Fi Settings] > [Mobile
Device Connect Button].
• Change the nickname (= 103)
• Check the camera's MAC address
• Reset the Wi-Fi settings (= 103)
• Disable display of recent target devices
• Remove smartphones assigned to the < > button
(= 93)
(= 88)
(= 104)
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot
Mode
3
Auto Mode/
Hybrid Auto Mode
4
Other Shooting
Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
109