NETGEAR WNCE2001 - Ethernet to Wireless Adapter Workshop Manual page 10

Table 1. Device Status Settings
Field
Device Status
Wireless Connection
Status
LAN Port
10 | Chapter 2. Advanced Settings
Hardware Version
Firmware Version
GUI Language Version
Wireless Connection
Link Rate
Name (SSID)
Region
Channel
Security Type
MAC Address
IP Address
DHCP Server
IP Subnet Mask
Gateway IP Address
DNS Server
Universal WiFi Internet Adapter WNCE2001
Description
The hardware version of the Internet adapter.
The current firmware version of the Internet adapter.
If you upgrade the firmware, this field changes.
The language version running on the Internet
adapter. If you upgrade the firmware, this field
changes.
The status of your wireless connection (connected or
disconnected).
The actual transmission (Tx) and receive (Rx) link
rate in the current wireless connection
Your Internet adapter is set up to connect to this
SSID, also called the wireless name.
The location of the Internet adapter.
The wireless channel of the network.
The security setting for the wireless network.
The physical address of the Internet adapter, as
seen from the local area network (LAN).
The IP address of the Internet adapter. The default is
192.168.1.251.
Identifies the network DHCP server on the wireless
network.
The IP subnet mask associated with the LAN IP
address of the Internet adapter. The default is
255.255.255.0.
The IP address of the wireless network gateway.
The IP address of the Domain Name Server (DNS)
of the wireless network.