D-Link DWL-7700AP - AirPremier Wireless AG Outdoor AP/Bridge Product Manual page 63

DWL-7700AP User's Manual
Device Configuration > Wireless > IEEE802.11a (continued)
DTIM (1~255):
Fragment Length
(256~2346):
RTS Length
(256~2346):
Autochannel Scan: Enable this option to allow the access point to automatically scan
SSID Broadcast: Allows you to enable or disable the broadcasting of the SSID to
Short Preamble: If you are transferring large amounts of data on your wireless
* Maximum wireless signal rate derived from IEEE Standard 802.11a specifications. Actual data throughput
will vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead lower actual data throughput rate.
D-Link Systems, Inc.
DTIM (Delivery Traffic Indication Message) is a countdown informing
clients of the next listening window for broadcast and multicast
messages.
This sets the fragmentation threshold (specified in bytes). Packets
exceeding the value set here will be fragmented. The default is 2346.
The RTS value should not be changed unless you encounter
inconsistent data flow. The default value is 2346.
for an available channel.
network clients.
network, enable this option.
Using the AP Manager
63