D-Link DWL-7700AP - AirPremier Wireless AG Outdoor AP/Bridge Product Manual page 44

DWL-7700AP User's Manual
Advanced > Multi-SSID (continued)
Master SSID:
Guest SSID:
Key Type:
VLAN Group ID:
Note: Security Setting Limit:
When the Primary SSID is set to use one key index for WEP, you can use 3 other key
indexes for Guest SSIDs.
If the Primary SSID is set to 802.1x, WPA/WPA2-EAP, WPA/WPA2-PSK, WPA-Auto-EAP,
or WPA-Auto-PSK, you can only use No Security for guest SSIDs.
D-Link Systems, Inc.
The Master SSID and Security can not be changed here. Those
values follow the settings in Home>Wireless.
When you Enable Guest SSID you can name each guest SSID.
Security:
The Security options for these three Guest SSIDs are Open System
or Shared Key.
Select HEX or ASCII.
Key Size:
Select 64, 128, or 152-bits
Key:
Select the 1st through the 4th key to be the active key. Enter key
here.
If you configure enable Guest access and configure Internal and
Guest networks on VLANs, this field will be enabled.
Provide a number between 1 and 4094 for the Internal VLAN.
This will cause the access point to send DHCP requests with the
VLAN tag. The switch and the DHCP server must support VLAN
IEEE802.1Q frames. The access point must be able to reach the
DHCP server.
Check with the Administrator regarding the VLAN and DHCP
configurations.
Using the Configuration Menu
44