NETGEAR WN2000RPTv2 User Manual page 20

Table 2. Status Settings (continued)
Field
GUI Language Version
Connection Status to
Existing Network
Extender PC Info
Extender Wireless
Settings
Universal WiFi Range Extender WN2000RPT
Name (SSID)
Connection Status
Link Rate
MAC Address
IP Address
DHCP Server
IP Subnet Mask
Gateway IP Address
Domain Name Server
Name (SSID)
Region
Channel
Wireless AP
Broadcast Name
Wi-Fi Protected Setup
Extender Network Settings
20
Description
The language version running on the extender. If you
upgrade the firmware, this field changes.
Your extender is set up to connect to this SSID, also
called the wireless name.
The status of your wireless connection (connected or
disconnected).
The actual transmission (Tx) and receive (Rx) link rate in
the current wireless connection.
The physical address of the extender, as seen from the
local area network (LAN).
The IP address of the extender. The default is
192.168.1.250.
Identifies the network DHCP server on the wireless
network.
The IP subnet mask associated with the LAN IP address
of the extender. The default is 255.255.255.0.
The IP address of the wireless network gateway.
The IP address of the Domain Name Server (DNS) of the
wireless network.
The name (SSID) or the wireless network.
The location where the extender is operating.
The channel of the wireless network.
On or Off.
On or Off.
Configured.