Blind Hemming - Baby Lock imagine BLE1AT-2 Instruction Manual

Blind Hemming

You Baby Lock Imagine Wave can create a sturdy, nearly invisi-
ble blindhem.
1. Set the machine for 2-Thread Overlock with the right needle
threaded. Set the stitch width at 5.0 and the stitch length at 4.0
in the standard range.
2. Fold up the hemline and press it in place. Then fold the hem
allowance back against the fabric right side to create a fold
about 1/4 " from the top edge of the hem as shown (fig. A).
3. Align the fold under the presser foot and stitch, allowing the
needle to catch only a thread or two of the soft fold: the blade
will trim the top edge of the hem and the loopers will overcast
the edge for a clean finish (fig. B).
4. Open the fold and press flat (fig. C).
Note: An optional blindhem foot for consistent guiding is avail-
able through your Baby Lock retailer (fig. D).
See page 7 Optional Accessories listing for part number
2
T
H
R
E
A
A
D
O
V
E
R
L
B
O
C
K
C
D
29