Fujitsu AWYZ14LBC Operating Manual page 12

SLEEP TIMER OPERATION
Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.
To Use the SLEEP timer
While the air conditioner is operating or stopped, press the
SLEEP button (Fig. 5
Each time the button is presssd, the time changes in the following order:
→ 1.0 → 2.0 → 3.0 → 5.0
The Indoor Unit's OPERATION Indicator Lamp (red) (Fig. 2
tor Lamp (green) (Fig. 2 ) light.
To Change the Timer Settings
Press the SLEEP button (Fig.5
ting time.
Press the SLEEP button (Fig.5
Each time the button is pressed, the time changes in the following order (Change
from the last setting time):
→ 1.0 → 2.0 → 3.0 → 5.0 → 7.0 → 9.0(hour)
Confirmation of TIMER's time
The left time of the TIMER which is being set currently will be displayed for 5 min-
utes.
En-11
).
→ 7.0
(RESET)
) and the TIMER Indica-
) once to display the last set-
) again to change the time.
(RESET)
To Cancel the Timer:
Press the CANCEL (TIMER) button.
To Stop the Air Conditioner During Timer
Operation:
→
9.0(hour)
Press the START/STOP button.