ESI's cross over control technology that is perfectly optimized and upgraded to provide perfect output level and frequency response properly matching the installed drivers and cabinet design.
nEar08 classic 3. Placement of the speakers The placement of monitoring speakers is very critical and can compromise their performance. This is a general rule for every loudspeaker. To monitor with nEar08 classic utilizing their maximum capabilities, an appropriate listening environment and a correct placement are important. Positioning In principle, two units and the listener should be positioned or aligned in a regular triangle form.
nEar08 classic Comments Please also make sure not place any obstacles that may block the flow of air or that could generate sound reflections (especially highly reflective material including glass or metal) in front of the speakers. Please do not put pot plants on top or too close to your monitoring speakers. 4.
nEar08 classic Rear Panel 1. XLR input – this connector accepts balanced XLR input connections. The XLR input is wired like this: INPUT SIGNAL XLR CONNECTIONS PIN 2 PIN 3 Shield PIN 1 2. TRS input – this jack accepts TRS input connections, either balanced or unbalanced. For balanced connections, a 3-conductor TRS plug is necessary.
ESI Audiotechnik GmbH. Other product and brand names are trademarks or registered trademarks of their respective companies. Correspondence For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at www.esi-audio.com. Disclaimer All features and specifications subject to change without notice.
Page 9
nEar08 classic With reference to regulations in the directives 73/23/EEC, 89/336/EEC, the equipment listed above is covered by this certificate and labelled with the CE mark conforms to the following standards: EN60065 Safety requirements for mains operated electronic and related apparatus for household and similar general use.