ESI nEar08 eXperience User Manual
ESI nEar08 eXperience User Manual

ESI nEar08 eXperience User Manual

Professional 8” studio reference monitors

Advertisement

Quick Links

Professional 8" Studio Reference Monitors
User's Guide

Advertisement

Table of Contents
loading

Summary of Contents for ESI nEar08 eXperience

  • Page 1 Professional 8” Studio Reference Monitors User’s Guide...
  • Page 3: Table Of Contents

    3. Placement of the speakers ......................5 Positioning ................................. 5 Orientation ................................. 5 Comments .................................. 6 4. Technical Data..........................6 Specifications................................6 Rear Panel .................................. 7 5. General Information ........................8 ESI - Copyright © 2007 Revision 1, June 2007 www.esi-audio.com...
  • Page 4: Introduction

    ESI's cross over control technology that is perfectly optimized and upgraded to provide perfect output level and frequency response properly matching the installed drivers and cabinet design.
  • Page 5: Placement Of The Speakers

    nEar08 eXperience 3. Placement of the speakers The placement of monitoring speakers is very critical and can compromise their performance. This is a general rule for every loudspeaker. To monitor with nEar08 eXperience utilizing their maximum capabilities, an appropriate listening environment and a correct placement are important. Positioning In principle, two units and the listener should be positioned or aligned in a regular triangle form.
  • Page 6: Comments

    nEar08 eXperience Comments Please also make sure not place any obstacles that may block the flow of air or that could generate sound reflections (especially highly reflective material including glass or metal) in front of the speakers. Please do not put pot plants on top or too close to your monitoring speakers. 4.
  • Page 7: Rear Panel

    nEar08 eXperience Rear Panel 1. XLR input – this connector accepts balanc ed XLR input connections. The XLR input is wired like this: INPUT SIGNAL XLR CONNECTIONS PIN 2 PIN 3 Shield PIN 1 2. TRS input – this jack accepts TRS input connections, either balanced or unbalanced. For balanced connections, a 3-conductor TRS plug is necessary.
  • Page 8: General Information

    Audiotechnik GmbH. Other product and brand names are trademarks or registered trademarks of their respective companies. Correspondence For technical support inquiries, contact your nearest dealer, local distributor or ESI support online at www.esi-audio.com. Disclaimer All features and specifications subject to change without notice.
  • Page 9 The product is marketed as ESI nEar08 eXperience studio monitoring speaker. With reference to regulations in the directives 73/23/EEC, 89/336/EEC, the equipment listed above is covered by this certificate and labelled with...

Table of Contents