When Threading Manually - Baby Lock ellegante 2 BLG2 Instruction And Reference Manual

f
Repeat the same steps for embroidering the
remaining colors.
→ When the last color is sewn, "Finish sewing" will
appear on the display. Press
display will return to the original screen.
Memo
The Thread Trimming Function is originally set
to trim excess thread jumps (threads linking
parts of the color steps, etc.). Depending on
the type of thread and fabric that are used, an
end of the upper thread may remain on the
surface of the fabric at the beginning of the
stitching. After embroidering is finished, cut off
this excess thread.
*If the setting has been turned off, trim the
excess thread jumps using scissors after the
pattern is finished.
See page 175 for information on the thread
trimming function.

■ When Threading Manually

a
Thread the machine manually with the first
color (see "Threading Manually" on page
31).
b
Lower the presser foot, then press the
"Start/Stop" button to start embroidering.
After 5-6 stitches, press the "Start/Stop"
button again to stop the machine.
c
Trim the excess thread at the start of the
, and the
color. If the end of the thread is under the
presser foot, raise the presser foot, then
trim the excess thread.
Memo
If there is thread left over from the beginning
of sewing, it may be sewn over as you
continue embroidering the pattern, making it
very difficult to deal with the thread after the
pattern is finished. Trim the threads at the
beginning.
d
Press the "Start/Stop" button again to
restart the machine.
e
Repeat steps
section.
SEWING AN EMBROIDERY PATTERN
d e
and from the previous
5
167